YL10.2 Hole 0.2mm Sintered Carbide Rod-tungsten carbide tube-ZhenFang Carbide

YL10.2 Hole 0.2mm Sintered Carbide Rod

tungsten carbide tube

For more information, warmly welcome to contact me

Shirley Pan(Ms.)

Email:shirley@chinahardalloy.com

Mobile: +8617773379950(wechat/whatsapp)

Specification

Material:	100% virgin tungsten carbide raw material
Dimension:	OD3ID0.15330mm various size for choose
Blank Tolerance:	OD:+-0.3mm ID:+-0.05mm
Grade:	YL10.2
Type:	carbide hollow round rod
Surface:	blank or grinding
Production Process:	Power mixing-Pressing-HIP sintering-Blank- Processing- Finished
Performance	High hardness, wear /corrosion resistancce, good toughness, good straightness
Application:	production various types electrical machine & electronic progressive dies and punches.And ceramics, printing machine, plastic, rubber, leather industry and cutting machines.
Non-standard or tolerance	can be customized

Tungsten carbide rod with single hole is tungsten carbide round rod, which has one radial holes.These rods are mainly used for manufacturing mills, drills, drill bits and other tools, but we also use them for processing cold heading die, stamping die, cold punching ball, warheads, watch parts for stamping, punching battery shell, toothpaste tubes and other molds.

But we cannot omit the fact that tungsten carbide rod with single hole if used for making knife or parts of mold, they are clamped in circular shaft, which is not conducive to the cutter and mold clamping. Of course, we are able to provide quality Tungsten Carbide Single Hole Rods

Our common size models:

Size range(ODXIDXL mm)	Detail size and blank tolerance
Size range(ODXIDXL mm)	OD( mm)	ID (mm)	L(mm)
ODxIDx330	2-3(0/+0.3)	0.15/0.2/0.25/0.3/......1.1(+-0.05)	30-340
ODxIDx330	4-6(0/+0.4)	0.2/0.25/0.3/0.4..........4(+-0.05)	30-340
ODxIDx330	7-10(0/+0.5)	0.2/0.25/0.3/0.4...........6(+-0.05)	30-340
ODxIDx330	11-20(0/+0.5)	0.2/0.25/0.3/0.4........12(+-0.05)	30-600
ODxIDx330	22	6/8/10/12(+-0.2)	100-600
ODxIDx330	25	6/8/10/12(+-0.2)	100-600
We are able to help you customized various diameter and length carbide rod

Material Physical Properties:

1) Hardness greater than or equal to HRA 92.5；

2) TRS greater than or equal to 3800 N/mm²；

3) Density greater than or equal to 14.2 g/cm³;

4) Porosity = A00 / B00 / C00；

5) No contamination by other materials；

6) Free of ETA phase condition；

7) Uniform and consistent grain size. No grain size can be larger than specified.

Some grade information for reference

Grade	Density g/cm3	Hardness HRA(hv)	T.R.S (M Pa)	Performances &applications recommended
YL10.2	14.5	92.5	3800	Wear resistance and strength comparatively higher,suitable for processing cast iron, non-ferrous metal and non-metalloid materials.
YG6	14.9	89.5	2150	Good Wear resistance, used for hard wood,processing original wood,aluminum section bar,brass rod and cast iron.
YG8	14.6	89	2320	Suitable for the roughening of cast iron and light alloys and also for the milling of cast iron and low-alloy steel.
YG11	14.4	87.5	2260	Medium grain, for wear parts and mining tools
YG15	14.1	86.5	2400	Medium grain, for mining tools, cold heading and punching dies
YS2T	14.45	92.5	2800	Fine carbide,high wear resistance,high bending strength,high resistance to bonding, high thermal strength.Machining of refractory alloys, stainless steel and high manganese steel etc.Mainly used for disc cutter and other tools
YNi8	14.6	88.5	1710	This grade with 8% nickel binder, it has good wear resistance& corrosion resistance performance ,especially used for high pressure environmental , also good for cutting the titanium alloy.