Coolant Hole Cemented Carbide Rod with Two Straight Holes tungsten carbide rod--ZhenFang Carbide

Coolant Hole Cemented Carbide Rod with Two Straight Holes tungsten carbide rod

1. The ideal grade for every application
Our wide and innovative grade range satisfies the exacting demands of the modern precision tooling industry. You can find the ideal grade specific to all materials and applications.
2. Acknowledged quality
Our solid carbide rods are known for constantly providing maximum quality. You can rely on our products as a basis for consistent performance capacity of your tools.
3. Extensive Product Dimension available in Stock
We offers you a wide range of dimensions, features and capabilities.
4. Application
Our carbide rods are used for cutting aluminum alloy ,cast iron , stainless steel, Refractory alloy steel, nickel-based alloy , titanium alloy and nonferrous materials,For making drills , drills , end mills &reamers , mold punches , core pins&hole drilling tools
We can supply all kinds of dimensions solid carbide rods with fine&sub micron grain size We manufactured and stocked many dimensions of ground and unground carbide rod for your. We have a large range of grade for your choice. We also can develop grade based on your application.

Applications of material:

◆ Cast iron

◆ Stainless steel,Heat-resistant steel,Hardened steel(hardness<60HRC)

◆ Nickel-based, Titanium alloys

5. Various types
Solid rods
Single Central hole rods
Double parallel hole rods
Double helical 30° 40° hole rods
Chmafered rods
One side chamfered with weldon shank rods
Special customized rods

Material information

Grade		YL10.2 (K25-K35)
Co	%	10
WC	%	90
Density	g/cm3	14.5
HV30	kg/mm2	1600
Hardness	HRA	92.5-92.8
Bending Strength	N/mm2	>3800
Porosity	A B C	A02B00C00
WC Grain Size	μm	0.6

Production Process of Tungsten Carbide Rod:

Power mixing-Pressing-HIP sintering-Blank- Processing- Finished

Various grade for your choice

Grade	YL10.2	YG6	YG6X	YG10X	YG8	YG15
ISO Range	K25-K35	K20	K10	K35	K30	K40-K50
WC+others %	90	94	94	90	92	85
Co %	10	6	6	10	8	15
Grain Size μm	0.6	0.8	0.6	0.6	0.8	0.8
Density g/cm3	14.5	14.9	14.9	14.5	14.6	14.1
Hardness HRA	92.5-92.8	89.5	92	90	89	86.5
T.R.S N/mm2	3800-4000	2150	2000	2200	2200	2400

Grade	Application
YL10.2	ultra-fine grain WC+ 10% Coblat, with good Wear resistance and Toughness, strength comparatively higher,suitable for PCB micro drills,for making drills,end mill,reamer,taps,burrs etc.
YG6	Fine Grain WC+6% Cobalt, with Good Wear resistance, used for hard wood,processing original wood,aluminum section bar,brass rod and cast iron.
YG6X	ultra-fine grain size with cobalt 6%,with good wear resistance,Suitable for processing Chilled cast iron, heat-resistant alloy steel, and fine process of common cast iron
YG10X	ultra-fine grain WC+ 10% Cobalt, suitable for small diameter Micro drill ,vertical milling cutter, rotating file
YG8	fine GrainWC+ 8% Cobalt Suitable for the roughening of cast iron and light alloys and also for the milling of cast iron and low-alloy steel.
YG15	fine grain WC +15% Cobalt for mining tools, cold heading and punching dies

Production Advantages

1.Using over 99.95% high purity tungsten carbide powder, it has a better strength and hardness combined with a longer service life than the normal one.
2. Using ultrafine grain size of tungsten carbide powder to produce,Hardness can reach to HRA93.6, Bending strength can reach to 4000N/mm²
3.Tolerance can reach to ±0.001mm, straightness can reach to ±0.02mm

4. Customization is acceped

Part of our carbide rod Size List

D	DTol	d	dTol	L	Tol
mm	mm	mm	mm	mm	mm
2.5	+0.20～0.50	0.3	±0.05	330	0～+5.0
4.0	+0.20～0.50	1.0	±0.05	330	0～+5.0
6.0	+0.20～0.50	1.0	±0.05	330	0～+5.0
8.0	+0.20～0.50	1.5	±0.05	330	0～+5.0
10.0	+0.30～0.60	2.0	±0.05	330	0～+5.0
12.0	+0.30～0.60	2.0	±0.05	330	0～+5.0
14.0	+0.30～0.60	2.0	±0.05	330	0～+5.0
16.0	+0.30～0.60	2.0	±0.05	330	0～+5.0
18.0	+0.40～0.80	3.0	±0.05	330	0～+5.0
20.0	+0.40～0.80	3.0	±0.05	330	0～+5.0
22.0	+0.40～0.80	3.0	±0.05	330	0～+5.0
24.0	+0.40～0.80	4.0	±0.05	330	0～+5.0
26.0	+0.40～0.80	5.0	±0.05	330	0～+5.0
15	+0.40～0.80	6	+-0.5	550max	0～+5.0
22	+0.40～0.80	10	+-0.5	550 max	0～+5.0
25	+0.40～0.80	12	+-0.5	500	0～+5.0

We manufactured and stocked unground and ground carbide rods for you. For more size information, please kindly email or call us.

Our packing and shipping

Based on Detail products, we use different Standard packing suitable overseas shipment.

For carbide rod packing as following

1. outsizde carton or plywood case

2. inner packing is plastic box or small carton with cotton or paper protection

3. Shipping:UPS,TNT,EMS,Fedex,DHL, shipment by sea, or as you request.

Production Process:

Power mixing-Pressing-HIP sintering-Blank- Processing- Finished

We guarantee:

* We are real factory in Zhuzhou

* Manufactured with100% tungsten carbide raw material

* Comply with ISO 9001:2015 Certification

* Rich experience of over 10 years

* Advanced technology , automatic pressing , HIP sintering

* Full ability to accept OEM & ODM orders

* Strict inspection for quality of raw material and finished products

All standard carbide rods are available un-ground and finish-ground (metric diameters, h5/h6 tolerance). If you have any special needs, please do not hesitate to call, or e-mail us. Our team will answer all of your questions in time

Our more Products

1. Tungsten Carbide rod

2. Tungsten Carbide Sealed Ring

3. Tugnsten Carbide Wear parts

4. Tugnsten Carbide Dies

5. Tungsten Carbide Non-standard parts

6. Tungsten Carbide Circular Blade

Why choose us ?
1.We are a real factory with very very nice wholesale price with high quality and good after sales service.
2.Rearch and development team with 5 members is rich experienced. OEM and label printing
orders are welcome.
3.The MOQ is 1pc.Sample and freight fee is borne by buyer.The sample fee will be reduced in
the next big quantity order.
4.Quick delivery time. We have carbide rods in stock. Delivery time within 3 days after your payment.If quantity is customized and large,delivery time is negociate.

Our Packing and shipment:

Packing	Outside Carton or plywood case with inner plastic box.
Shipping	UPS,TNT,EMS,Fedex,DHL,or by sea,as you reques

Our equipments and process

If have any more information, please feel free to contact with me.

Contact person:Ms Sharon Chen

Mobile phone/Whatsapp:+86-13823202651

Email address:sharon@chinahardalloy.com

Website:www.0731zzzf.com